Linked Life Data

11395705

Source:http://linkedlifedata.com/resource/pubmed/id/11395705

Statements in which the resource exists as a subject.
PredicateObject
rdf:type
lifeskim:mentions
pubmed:issue
6
pubmed:dateCreated
2001-6-7
pubmed:abstractText
The aim of this study was to compare various surface treatment methods to define the procedure that produces adequate bond strength between ceramic brackets and porcelain. The specimens used in this study, 60 porcelain tabs, were produced by duplication of the labial surface of a maxillary first premolar. The 6 different preparation procedures tested were: (1) sandblasting with 50 microm aluminum oxide in a sandblasting device, (2) application of silane to the porcelain and the bracket base, (3) sandblasting followed by application of silane, (4) acid etching with 9.6% hydrofluoric acid, (5) acid etching with 9.6% hydrofluoric acid followed by application of silane, and (6) sandblasting followed by application of 4-Meta adhesive. The ceramic brackets were bonded with no-mix orthodontic bonding material. A bonding force testing machine was used to determine tensile bond strengths at a crosshead speed of 0.5 mm per second. The results of the study showed that porcelain surface preparation with acid etching followed by silane application resulted in a statistically significant higher tensile bond strength (P < .05). Sandblasting the porcelain surface before silane treatment provided similar bond strengths, but sandblasting or acid etching alone were less effective. Silane application was recommended to bond a ceramic bracket to the porcelain surface to achieve bond strengths that are clinically acceptable.
pubmed:language
eng
pubmed:journal
pubmed:citationSubset
D
pubmed:chemical
pubmed:status
MEDLINE
pubmed:month
Jun
pubmed:issn
0889-5406
pubmed:author
pubmed:issnType
Print
pubmed:volume
119
pubmed:owner
NLM
pubmed:authorsComplete
Y
pubmed:pagination
617-20
pubmed:dateRevised
2004-11-17
pubmed:meshHeading
pubmed:year
2001
pubmed:articleTitle
Tensile bond strength of ceramic orthodontic brackets bonded to porcelain surfaces.
pubmed:affiliation
Faculty of Dentistry, Hacettepe University, Ankara, Turkey. ikocadereli@hotmail.com
pubmed:publicationType
Journal Article