| pubmed-article:6630125 | pubmed:abstractText | The validity of 2 electrothermal atomic absorption spectrometric methods for determination of selenium in foods and diets was tested. By using 0.5% Ni(II) as a matrix modifier to prevent selenium losses during the ashing step, it was shown that selenium can be determined in samples containing greater than or equal to 1 microgram Se/g dry wt without organic extraction. The mean recovery tested, using NBS Bovine Liver, was 98%; recovery of added inorganic selenium in Bovine Liver matrix was 100%. In addition, this method gave values closest to the median value of all participating laboratories using hydride generation AAS or the spectrofluorometric method in a collaborative study on high selenium wheat, flour, and toast samples. For samples with concentrations less than 1 microgram Se/g dry wt, separation of selenium from interfering Fe and P ions by organic extraction was necessary. Using inorganic 75Se in meat and human milk matrixes, an ammonium pyrrolidine dithiocarbamate-methyl isobutyl ketone-extraction system with added Cu(II) as a matrix modifier yielded the best extraction recoveries, 97 and 98%, respectively. Accuracy and precision of the method were tested using several official and unofficial biological standard materials. The mean accuracy was within 4% of the certified or best values of the standard materials and the day-to-day variation was 9%. The Se/Fe or Se/P interference limits proved to be low enough not to affect selenium determinations in practically all foods or diets. The practical detection limit of the method was 3 ng Se/g dry wt for 1.0 g dry wt samples.(ABSTRACT TRUNCATED AT 250 WORDS) | lld:pubmed |
