Linked Life Data

17075170

Source:http://linkedlifedata.com/resource/pubmed/id/17075170

Statements in which the resource exists as a subject.
PredicateObject
rdf:type
lifeskim:mentions
pubmed:issue
5
pubmed:dateCreated
2006-10-31
pubmed:abstractText
In this work composite materials, based on quartz fibers and epoxy resins, were employed with the aim to restore damaged teeth. The composite materials were chosen because they show biomechanical features very similar to that of the dentine, the main constituent of the tooth. Extracted teeth were rebuilt with two different restorative procedures: in the first, the composite material was pre-formed in a conical trunk shape abutment (PA) and then bonded to a fiber quartz post with a dental bonder. In the second rebuilt system the abutment was prepared by cross linking the resin on the fiber quartz post with a halogen lamp (CRA). The restored teeth were then mechanically tested and observed with a Scanning Electron Microscope (SEM) with the aim to study the interaction between the reconstructive materials. Wetting and roughness measurements were also carried out in order to study the interface adhesion between the post and the abutments. Characterization analysis evidenced that the CRA restorative procedure improves the adhesion between the substitutive materials and shows higher fracture strength than the PA ones. Anyway both the rebuilt systems are able to support the masticator load. An explanation of the interfacial post-abutment interaction phenomenon is discussed.
pubmed:language
eng
pubmed:journal
pubmed:citationSubset
IM
pubmed:chemical
pubmed:status
MEDLINE
pubmed:issn
0959-2989
pubmed:author
pubmed:issnType
Print
pubmed:volume
16
pubmed:owner
NLM
pubmed:authorsComplete
Y
pubmed:pagination
349-58
pubmed:meshHeading
pubmed:year
2006
pubmed:articleTitle
Mechanical behavior of quartz fiber reinforced epoxy resins for teeth restoration.
pubmed:affiliation
Industrial Chemistry and Material Engineering Department, Contrada Di Dio, Vill. S. Agata, I-98166 Messina, Italy. avisco@unime.it
pubmed:publicationType
Journal Article, In Vitro