Source:http://linkedlifedata.com/resource/pubmed/id/11327406
Switch to
| Predicate | Object |
|---|---|
| rdf:type | |
| lifeskim:mentions | |
| pubmed:issue |
1
|
| pubmed:dateCreated |
2001-4-30
|
| pubmed:abstractText |
Wear of the socket liner and resulting osteolysis are the major causes of failure in cementless hip arthroplasties. We report alarming wear of the first-generation polyethylene liner of the cementless porous-coated Biomet Universal cup. Radiographs of 107 primary hip arthroplasties were analyzed retrospectively. The mean follow-up time was 74 (47-91) months. The linear wear of the polyethylene liners was assessed using a modification of the Livermore method. The median linear wear was 1.0 (0-6.2) and the median linear wear rate was 0.17 mm/year. There was a statistically significant difference between the 28 mm and 32 mm femoral head groups both in the volumetric wear and in the volumetric wear rate. The median linear wear was 0.28 mm/year and 0.14 mm/year for the 32 mm and 28 mm heads, respectively. So far, 14 revisions have been performed or have been scheduled because of excessive wear of the polyethylene liner. In regression analysis, the factors related to the wear rate were the 32 mm size of the femoral head and screw fixation of acetabular shell. We found that the cases with calcar rounding were associated with significantly greater wear. Possible reasons for increased wear of the Hexloc liner may be the cylindrical design, thin polyethylene, and poor quality of the polyethylene. Regular clinical and radiographic follow-ups are recommended especially for hips with 32 mm femoral heads or with screw fixation. If progressive wear of the liner is observed, revision must be considered.
|
| pubmed:language |
eng
|
| pubmed:journal | |
| pubmed:citationSubset |
IM
|
| pubmed:chemical | |
| pubmed:status |
MEDLINE
|
| pubmed:month |
Feb
|
| pubmed:issn |
0001-6470
|
| pubmed:author | |
| pubmed:issnType |
Print
|
| pubmed:volume |
72
|
| pubmed:owner |
NLM
|
| pubmed:authorsComplete |
Y
|
| pubmed:pagination |
1-7
|
| pubmed:dateRevised |
2006-11-15
|
| pubmed:meshHeading |
pubmed-meshheading:11327406-Adult,
pubmed-meshheading:11327406-Aged,
pubmed-meshheading:11327406-Arthritis, Rheumatoid,
pubmed-meshheading:11327406-Bone Screws,
pubmed-meshheading:11327406-Coated Materials, Biocompatible,
pubmed-meshheading:11327406-Equipment Failure Analysis,
pubmed-meshheading:11327406-Female,
pubmed-meshheading:11327406-Follow-Up Studies,
pubmed-meshheading:11327406-Hip Dislocation, Congenital,
pubmed-meshheading:11327406-Hip Joint,
pubmed-meshheading:11327406-Hip Prosthesis,
pubmed-meshheading:11327406-Humans,
pubmed-meshheading:11327406-Logistic Models,
pubmed-meshheading:11327406-Male,
pubmed-meshheading:11327406-Middle Aged,
pubmed-meshheading:11327406-Osteoarthritis, Hip,
pubmed-meshheading:11327406-Polyethylene,
pubmed-meshheading:11327406-Prosthesis Design,
pubmed-meshheading:11327406-Prosthesis Failure,
pubmed-meshheading:11327406-Regression Analysis,
pubmed-meshheading:11327406-Reoperation,
pubmed-meshheading:11327406-Retrospective Studies,
pubmed-meshheading:11327406-Risk Factors,
pubmed-meshheading:11327406-Treatment Outcome
|
| pubmed:year |
2001
|
| pubmed:articleTitle |
Alarming wear of the first-generation polyethylene liner of the cementless porous-coated Biomet Universal cup: 107 hips followed for mean 6 years.
|
| pubmed:affiliation |
Department of Surgery, Tampere University Hospital, Finland. timo.puolakka@tays.fi
|
| pubmed:publicationType |
Journal Article,
Research Support, Non-U.S. Gov't
|