Source:http://linkedlifedata.com/resource/pubmed/id/11220583
Switch to
| Predicate | Object |
|---|---|
| rdf:type | |
| lifeskim:mentions |
umls-concept:C0037813,
umls-concept:C0038239,
umls-concept:C0040223,
umls-concept:C0040302,
umls-concept:C0077514,
umls-concept:C0205125,
umls-concept:C0348007,
umls-concept:C0936012,
umls-concept:C1522408,
umls-concept:C1527178,
umls-concept:C1555977,
umls-concept:C1697272,
umls-concept:C1704806,
umls-concept:C1705938,
umls-concept:C1948027,
umls-concept:C1979963,
umls-concept:C2003903,
umls-concept:C2610507
|
| pubmed:issue |
2-3
|
| pubmed:dateCreated |
2001-2-23
|
| pubmed:abstractText |
A homogenized 193 nm ArF* laser ablation system coupled to an inductively coupled plasma-"Time of Flight"-mass spectrometer (LA-ICP-TOFMS) was tested for depth profiling analysis on different single-layer Ti based coatings on steel and W carbides. Laser parameters, such as repetition rate, pulse energy and spatial resolution were tested to allow optimum depth related calibration curves. The ablation process using a laser repetition rate of 3 Hz, 120 microm crater diameter, and 100 mJ output energy, leads to linear calibration curves independent of the drill time or peak area used for calibrating the thickness of the layer. The best depth resolution obtained (without beam splitter) was 0.20 microm per laser shot. The time resolution of the ICP-TOFMS of 102 ms integration time per isotope was sufficient for the determination of the drill time of the laser through the coatings into the matrix with better than 2.6% RSD (about 7 microm coating thickness, n = 7). Variation of the volume of the ablation cell was not influencing the depth resolution, which suggests that the depth resolution is governed by the ablation process. However, the application on the Ti(N,C) based single layer shows the potential of LA-ICP-TOFMS as a complementary technique for fast depth determinations on various coatings in the low to medium microm region.
|
| pubmed:language |
eng
|
| pubmed:journal | |
| pubmed:status |
PubMed-not-MEDLINE
|
| pubmed:issn |
0937-0633
|
| pubmed:author | |
| pubmed:issnType |
Print
|
| pubmed:volume |
368
|
| pubmed:owner |
NLM
|
| pubmed:authorsComplete |
Y
|
| pubmed:pagination |
221-6
|
| pubmed:dateRevised |
2003-10-31
|
| pubmed:articleTitle |
Depth profile analysis of various titanium based coatings on steel and tungsten carbide using laser ablation inductively coupled plasma--"time of flight" mass spectrometry.
|
| pubmed:affiliation |
Laboratorium für Anorganische Chemie, ETH Zürich, Switzerland.
|
| pubmed:publicationType |
Journal Article
|