| pubmed-article:19724307 | pubmed:abstractText | We fabricated vertical cavity surface emitting lasers (VCSELs) and resonant-cavity-enhanced photodetectors (RCE-PDs) with GaAs/AlGaAs distributed Bragg reflectors (DBRs), operating at lambda approximately 980 nm, based on an intracavity-contacted structure. The top-DBR mesa diameter of the VCSELs was optimized to 18 microm in terms of slope efficiency, differential series resistance, and 3 dB bandwidth. For VCSELs with an oxide aperture of 4.5 microm and a top-DBR mesa diameter of 18 microm, the threshold current was about 1.2 mA, exhibiting maximum output power of approximately 3.49 mW (at 20 degrees C) with good uniformity. The effect of the overetching in the outermost layer of RCE-PDs on the device performance was also investigated. For RCE-PDs based on the VCSEL structure, a peak responsivity of 0.44 A/W (at lambda approximately 979.7 nm) with a spectral width of approximately 3 nm and a dark current of 68 pA under a bias voltage of -5 V at 20 degrees C was obtained. The maximum 3 dB bandwidths of approximately 11.5 GHz with a modulation current efficiency factor of 5.6 GHz/mA(1/2) at -7 mA and 9 GHz at -7 V were achieved for VCSELs and RCE-PDs, respectively. | lld:pubmed |
