Source:http://linkedlifedata.com/resource/pubmed/id/10870897
Switch to
Predicate | Object |
---|---|
rdf:type | |
lifeskim:mentions | |
pubmed:issue |
4
|
pubmed:dateCreated |
2000-11-7
|
pubmed:abstractText |
As more therapies are introduced to treat osteoporosis, precise in vivo methods are needed to monitor response to therapy and to estimate the gains in bone strength that result from treatment. A method for evaluating the strength of the proximal femur was developed and its short term reproducibility, or precision, was determined in vivo. Ten volunteer subjects aged 51-62 years (mean 55.6 years), eight women and two men, were examined using a quantitative computed tomography (QCT) protocol. They were positioned, scanned, repositioned and re-scanned. The QCT images were registered in three-dimensional space, and finite element (FE) models were generated and processed to simulate a stance phase load configuration. Stiffness was computed from each FE model, and strength was computed using a regression equation between FE stiffness and fracture load for a small set (n = 6) of experimental specimens. The coefficients of variation (COV) and repeatability (COR= 2.23* 42*COV) were determined. The COV for the FE fracture load computed was 1.85%, and the detectable limit (coefficient of repeatability) for serial measurements was 5.85%. That is, if a change of 5.85% or more in computed FE fracture load is observed, it will be too large to be consistent with measurement variation, but instead can be interpreted as a real change in the strength of the bone. The detectable limit of this method makes it suitable for serial research studies on changes in femoral bone strength in vivo.
|
pubmed:grant | |
pubmed:commentsCorrections | |
pubmed:language |
eng
|
pubmed:journal | |
pubmed:citationSubset |
IM
|
pubmed:status |
MEDLINE
|
pubmed:month |
Apr
|
pubmed:issn |
0090-6964
|
pubmed:author | |
pubmed:issnType |
Print
|
pubmed:volume |
28
|
pubmed:owner |
NLM
|
pubmed:authorsComplete |
Y
|
pubmed:pagination |
408-14
|
pubmed:dateRevised |
2007-11-14
|
pubmed:meshHeading |
pubmed-meshheading:10870897-Biomechanics,
pubmed-meshheading:10870897-Biomedical Engineering,
pubmed-meshheading:10870897-Female,
pubmed-meshheading:10870897-Femur,
pubmed-meshheading:10870897-Humans,
pubmed-meshheading:10870897-Image Processing, Computer-Assisted,
pubmed-meshheading:10870897-Male,
pubmed-meshheading:10870897-Middle Aged,
pubmed-meshheading:10870897-Models, Biological,
pubmed-meshheading:10870897-Reproducibility of Results
|
pubmed:year |
2000
|
pubmed:articleTitle |
Short term in vivo precision of proximal femoral finite element modeling.
|
pubmed:affiliation |
Diagnostic Radiology, Henry Ford Hospital, Detroit, MI, 48202, USA. dianna@rad,hfh.edu
|
pubmed:publicationType |
Journal Article,
Research Support, U.S. Gov't, P.H.S.,
Research Support, Non-U.S. Gov't
|